The first thing you need to do when you buy your first dishwasher is to read the manual. Most of the do’s and don’ts are mentioned clearly with the instructions on how to use them. But many of us ignore the instructions and focus only on basic operations. We forget how to put the dishes properly, how much detergent to put in the detergent container, which detergent to use, and many other little details that can create more significant problems in the future. For those who never got the time to read the instruction manual, we present you the common mistakes that you can avoid for the proper functioning of the dishwasher and sparkling clean utensils:
-
Overfilling
Often people tend to put all their dishes in the dishwasher to clean everything at one go. But this practice can leave your words unclean with food remnants still on the plates. Stacking all of the words together will not only leave them dirty but can also damage them by overcrowding. Words can break, and their particles can clog the drain and pump both.
2. Loading Dishes in the Wrong Direction
The direction is important while placing the plates, spoons, and bowls for the water to fall at the right place to clean them. Each dish you put in the dishwasher should be obstruction free so that they face the spray arm for water pressure to hit on each plate. Placing the different words in the wrong direction will not clean them; instead, your detergent and water will get wasted. Read the Frigidaire dishwasher troubleshooting manual to understand the issue clearly and correct way of putting utensils in it.
3. Not Cleaning the Machine Once In A While
If your crockery is still dirty with water spots and seems cloudy, there are chances that the dishwasher is internally dirty and need a quick clean up. Cleaning your dishwasher once in a while with the relevant detergent or by cleaning hacks will give the best results.
4. Not Pre-Rinsing the Dishes before Loading
Imagine your plates covered with melted cheese, eggs, and thick curry, and you put them directly into the dishwasher without scraping the leftovers. Although dishwashers are designed to clean even the thickest crust but putting the dishes this way can create blockages at various places, leaving them smelly. Always rinse or scrape the leftover food from the plates and bowls for maximum efficiency of the dishwasher and avoid clogging problems.
5. Adding Wrong and Extra Detergent
Adding extra detergent can be applicable for clothes, but for dishwashing, it can be a complete ruin. It will leave a soapy residue on the utensils, which requires cleaning them over. Dishwasher detergents are specifically made for cleaning the dishes with the right amount of water used by a dishwasher commonly. Hence using cheap detergents instead of the specific one with not give you the best results. Always use the right product and the correct amount of detergent for super clean dishes.
6. Not Running Hot Water before Loading the Dishes
To clean the hard and sticky plates, you need to start the hot water cycle. Forgetting to run the hot water will automatically switch to cold water, which will not clean the sticky part of the plates. Run the hot water cycle for a peak performance level from the dishwasher, especially during the winter season when water is even colder than usual. You need to turn the geyser for a couple of minutes to fill up the pump.
Follow the instructions in the manual.
Instruction manuals are the most neglected piece of the document by us, but it is the heart and soul of the appliance that mentions each part and their functions in detail so that you don’t have to worry about how to operate them. Not only does it says the features and functions, reading it thoroughly will help you understand what not to do with your dishwasher. Doing the dishes the right way will reduce half of your issues automatically. Keep the copy of a Frigidaire dishwasher troubleshooting manuals are in case of emergency.
